SCC Series Compact Busway
ViewAddress: no.1 huapeng road
Phone: 86-511-88411157
Email: zhaoxing@huapeng.com
SCC Series Compact Busway
Huapeng Group Co.,Ltd. Is the precursor of busbar in China, is the unique manufactory who participated in drafting the standard of LV busbar system. It leaded 6 technical revolutions of Busbar in China. And it holds 60 patents. The SCC series compact busbar is the new generation developed by Huapeng group.
1 Product Overview
Enclosure Material
Bus bar enclosure is made of aluminum-magnesium alloy profiles, the overall structure has high bending strength and good corrosion resistance, particularly for both good heat dissipation and grounding. Bus shell form of non-magnetic choke Ring, can reduce heating phenomenon caused by eddy-current bus transfer between phases, significantly enhance the busbar current carrying capacity, enhanced transmission. Efficiency and reduce operating costs;
Shell structure
the unique structure of dentate cooling of the surface of bus side and cover, extend its line of perimeter, increase the product contact area with air and emanate heat of the system run-time. By the test, in the same load, the temperature can reduce 6 ℃ of the bus system by using of this structure. It saves a lot of precious metals of copper while sustain the safe operation of the system;
Busway framework - shell ground
Bus use good electrical conductivity properties of housing as a grounding protection conductor: when there is a major capacity in the system ground fault, short circuit current first go through> 50% of the phase section of the aluminum case as efficient transmission, than reduce the ground path and the grounding resistance so as to protect
busbar system effective operation and operator safety;
Connector device
Bus connector device add the heat sink the same material with bus side and cover between any the two adjacent plates apart. metal materials excellent thermal performance, make the bus connector connected components formed good heat sink, so as to effectively reduce the temperature rise of busbar joints and improve bus joint safe operation factor;
Bus pouring terminal
SCC-bus terminal adopt Huapeng Group casting bus technology. Casting bus terminal by use of epoxy materials form flexible bus terminal structure to meet the different directions terminals transfer. Secure and reliable connection assures the safe of the system terminal;
New Connection Boxes
Intelligent bus plug box design: the user's remote control can be achieved, remote transfer function applied to the system flexible horizontal or vertical installation Field monitoring, simple operation.
Conductor
SCC Series busbar conductor is special rectangular copper bars. Reasonable cross-section, special width of the plane make the largest peripheral surface of the conductor, so it’s good for conductivity and the contact overlap surface of the conductor. The conductor is 99.993% copper conductors and raw materials is South American T1 copper.
Coating
Busbar conductor surface adopt tin plating (δ6um), the tin plating process for the conductor provides an excellent electrical conductivity, and prevent copper oxide film formed on the surface of copper conductor from lap temperature rising. We also provide silver-plated handle for your choice.
Plug Interface
SCC-type feeder busbar system fed aopt plug interface feed type. Security rate is up to IP54 (standard IEC-529). Each set of jacks are equipped with a special opening and closing locking device (patent devices), the effectiveness is anti-fouling materials, dust and prevent misuse fingers. The material is highly efficient ABS engineering plastics. And a steel protective cover is added.
2 Technical Data
NO. Current Dimension mm×mm Weight＜kg/m Rated short time withstand current KA Rated insulation voltage V Rated Voltage V Resistance R Reactance XL Impedance RL IP
1 400 145×101 16.0 30 1000 660 0.067172 0.031577 0.08718 IP65
2 630 145×111 18.5 30 1000 660 0.059932 0.02875 0.078008 IP65
3 800 145×126 22.5 30 1000 660 0.049716 0.024782 0.065061 IP65
4 1000 145×141 26.0 30 1000 660 0.042476 0.021955 0.055889 IP65
5 1250 145×166 32.5 50 1000 660 0.029561 0.01774 0.039926 IP65
6 1600 145×196 40.0 50 1000 660 0.024579 0.015687 0.033624 IP65
7 2000 145×234 48.0 50 1000 660 0.01478 0.009882 0.020433 IP65
8 2500 145×284 60.5 80 1000 660 0.012289 0.007759 0.016772 IP65
9 3150 145×389.5 76.5 80 1000 660 0.009854 0.006954 0.013803 IP65
10 4000 180×389.5 99.5 100 1000 660 0.00739 0.004758 0.010129 IP65
11 5000 180×465.5 119.5 100 1000 660 0.006145 0.003851 0.008373 IP65
12 6300 180×565.5 152.5 120 1000 660 0.004927 0.00315 0.006742 IP65
3 Protect degree
Protect degree of SCC busbar system is IP65. Protection degree passes the detection and identify of national authority designated department.
4 Testing
before delivery, each section of SCC type busbar would be inspection strictly. Busbar systems all follow the ISO9001: 2000 guidelines for manufacturing and testing.
5 Standard
SCC-type busbar system meets the following criteria:
IEC 439 1.2 " International Electrical Association Standards"
GB 7251.1-2005 "Low-voltage switchgear and control equipment
Part I: Type tested and partially type tested assemblies "
GB7251.2-2006 "Low-voltage switchgear and control equipment
Part II: special requirements for busbar(busways) trunking systems"
GBJ 149-90 “Electrical device installation construction bus devices installations and acceptance standards”
JB / T 9662-1999 "intensive insulated busbar trunking system" (dense insulation busbar)
NEMABU1.1 "busbar installation, maintenance standards"
6 Environmental conditions
SCC-type busbar system meets the following conditions:
Altitude: ≤ 2000m seismic intensity: ≤ 8 level
Temperature: Maximum temperature +50 ℃ (average temperature not more than +40 ℃ in 24 hour), maximum daily temperature 15 ℃.
Humidity: daily maximum relative humidity 95%, maximum relative humidity 90% (20 ℃).
Installation Category: Ⅲ level pollution level: 3 level
7 Order specification
Rated voltage：≤1000V（AC） Rated frequency：50（60）HZ
Protection class：IP65 Insulation Performance：B-class
Heat Level: B Class Insulation resistance: ≥ 20MΩ (line to line)
Rated short time withstand current :15-75KA busbar temperature rise: the joints ≤ 70K, shell ≤ 55K
Huapeng Group Co., Ltd. with the most sophisticated technology to provide high-SCC series of bus: reduce bus impedance and pressure drop and improve the bus system's carrying capacity, and enhance the dynamic thermal stability of the bus system to ensure the safe operation of the user system. It brings direct economic benefits to the society.
no.1 huapeng road
Lahore
green zhao
86-511-88411157
86-13645286323
zhaoxing@huapeng.com
86-511-88410008
http://www.huapeng.com
