KARACHI

DRILLING bit

PDC drill bits: New products with super long life, high efficiency and wide application. 1) Super long life-as 10 times as cemented carbide drill bits under the same condition. 2) High efficiency-Times of lifting the drilling machine could be reduced sharply, and the average time efficiency could be increased more than 2 times. 3) Wide range of application-it could have a penetration of rock formation with f ≤12,especially for the rock formation with f=5-10. 1. PDC drill bits (non-core bits) Application for penetration of gas hole, water-discharging hole, and grout hole under coal mine. Size: dia 48-dia 270mm Concave model, Pillar model, Blade model, Expansion model 2. PDC Drill bits (core bits) Application for core drill of coal system stratum with hardness coefficient f<10 in geological exploratory. Size: dia 56- dia 133mm

develop zone

Karachi

Irina

+86-312-3631122

0086-15930483969

threesource@yahoo.com.cn

+86-312-3632588

http://http:www.threesource.cn

DRILLING pipe

Drilling pipe: We are a manufacturer who specially produce drilling rigs, drilling tools include drilling pipe and bits. Drilling pipes we produce is according to national standard strictly. Include all kinds of sizes. and all type: air drilling pipe, auger drilling pipe, hollow drilling pipe etc. Ф42X1500mm Φ75X1500mm Φ60X1500mm Φ60X4500mm Φ54X90X1500mm

develop zone

Karachi

Irina

+86-312-3631122

0086-15930483969

threesource@yahoo.com.cn

+86-312-3632588

http://http:www.threesource.cn

TSP-30 man portable drilling r

TSP-30 man portable drill rig is one new kind of portable drill rig with the advantages both from domestic and foreign throughout repeated tests, designed and produced through many tests. It is applicable to be used in farmland, river network, brush area and mountain such place where is not easy to collapse to do seismic prospecting, mine survey and geology investigation etc. drilling work. Its feature includes portable, functional and high efficiency. 9HP Diesel engine or 9HP gasoline engine provides power for drilling rig. Engine adopts stepless speed regulating method. So it is unnecessary to stop or start engine frequently during drilling. Good performance, high efficiency low labor intensity. Drilling rigs meet QHSE requirements. Drilling method: Air hammer drilling/Air drilling, Mud drilling Drilling depth: Air hammer drilling/Air drilling, 15m/50ft, Mud drilling : 30m/100ft Drilling hole diameter: 75mm, 90mm

develop zone

Karachi

Irina

+86-312-3631122

0086-15930483969

threesource@yahoo.com.cn

+86-312-3632588

http://http:www.threesource.cn

TSP-40 man portable drilling r

TSP-40 man portable drilling rig is the products absorb the advantages both from domestic and foreign throughout repeated tests. Strict testing has been passed in the worst terrain and mountain areas. It can be used in mountain, hill, Plain, Forest, Farmland for petroleum prospecting. All of operation handles and indicators were installed on operation platform. The rig was installed with safety, caution and environmental protection symbols, and it meets with the requirement of QHSE. It uses full hydraulic drive, simple to use and easy to maintain. We choose mature product from the well-known specialized company. Collocated with different well bottom power system, drilling rig can carry out many kind of drilling methods such as air hammer drilling, air drilling, mud drilling and auger drilling to meet drilling work under different geologic environment with high efficiency. The rig has the advantages of light-weight, simple construction, easy to assemble, disassemble, transport and operate. The drilling rig can be work at -10 and +55 , 0-3000m altitude. Ambient temperature in dusty environment. Drilling method: Air hammer drilling/Air drilling, Mud drilling, Auger drilling Drilling depth: Air hammer drilling/Air drilling: 40 m/131ft Mud drilling : 30m/100ft Auger drilling: 20m/65ft Drilling hole diameter: 75mm, 90mm

develop zone

Karachi

Irina

+86-312-3631122

0086-15930483969

threesource@yahoo.com.cn

+86-312-3632588

http://http:www.threesource.cn

TSP-70 man portable drilling r

TSP-70 man portable drilling rig has simple structure, uses full hydraulic driving system, and easy to operate and maintain.Application area include: mountain region, loess tableland, Jungle, Gobi and seasonality farmland etc complex stratum. It is used to do seismic prospecting, mine investigation and geology structure etc. borehole engineering. Collocated with different well bottom power system, drilling rig can carry out many kind of drilling methods such as air hammer drilling, air drilling, mud drilling and auger drilling to meet drilling work under different geologic environment with high efficiency. Provide drilling tools can release explosive when lifting, and release explosive no lifting. Max drilling depth is up to 70 meters. Guard fence is installed on drilling rig and improve the safety of drilling rig, reduce accident rate. Drilling rigs meet QHSE requirements. Drilling method Air/air hammer, mud and auger drilling Depth Air/air hammer drilling 70 m Mud drilling (depends on mud pump ability) 40 m Auger drilling (depends on stratum) 40m Hole diameter 90 mm

develop zone

Karachi

Irina

+86-312-3631122

0086-15930483969

threesource@yahoo.com.cn

+86-312-3632588

http://http:www.threesource.cn

BANNER

TST-150 truck-mounted drilling

TST-150A truck mounted drilling rig uses domestic off-road truck chassis. It can carry out air drilling, mud drilling normal circulation function. Studying from each kind of drilling technology and each component’s load frequency spectrum, the drilling rig collects all advantages of that making the most use of engine power, reasonable configuration of air compressor, mud pump and hydraulic system. That makes drilling rig carry out reasonable output parameters by using limited resources, and it is really one satisfying drilling rig with competitive price and good quality. Drilling rig uses full hydraulic driving. The power takes from chassis engine. After changing in transfer case, power of chassis will be sent to hydraulic system of drilling rig. About the operating lever, drilling rig adopts centralized control. It facilitates operating and is reliable. Drilling rigs meet QHSE requirements. 2 Main technical parameters: Drilling method Mud drilling, air drilling and air hammer drilling Max drilling depth Mud drilling: 150m, air drilling: 80m Power swivel Max output torque 3900 N.m Output rev. scope 0-278 r/min

develop zone

Karachi

Irina

+86-312-3631122

0086-15930483969

threesource@yahoo.com.cn

+86-312-3632588

http://http:www.threesource.cn

TST-200 truck-mounted drilling

TST-200 Drilling rig are designed with air, mud and air hammer drilling. It is applicable for seismic prospecting in complex stratum area such as Gobi, desert, river bed and gravel etc. Mainly uses imported components. It is mounted on 4X4 or 6X6 off-road chassis with steady performance, low maintenance cost and easy to operation. It can carry out liquid normal circulation and air normal circulation etc. many kinds of drilling methods. Adopts full hydraulic drive, central control, facilitate operating and reliable. Specially designed two pieces of hoisting chains auto equalizer can improve the system’s security and reliability. Drilling rigs meet QHSE requirements. 2 Main technical parameter of drilling rig: 1、 Optimum working ambient temperature: -10～40℃. 2、 Optimum working altitude height: lower than 2000meters. 3、 Drilling method: air/air hammer drilling & water drilling 4、 Max drilling depth: air drilling and air hammer drilling: 120 meters & water drilling: 200meters 5、 Chassis Truck Drive type: 4x4

develop zone

Karachi

Irina

+86-312-3631122

0086-15930483969

threesource@yahoo.com.cn

+86-312-3632588

http://http:www.threesource.cn

TST-30 tractor drilling rig

Tractor drilling rig was a kind of new type that designed for petroleum prospecting in Hill, Gobi and Jungle area. The drill was mounted on 4X4 tractor which has high quality and large power. The power of drilling rig was take off from the tractor engine. Adopted advanced hydraulic technology to control the rotation, pulldown, hoisting, jack flex movement. The operation is easy and reliable, the movement is flexible and the transport is convenient. Meet QHSE requirement in international prospecting marketing. The Standard configured drilling rig has auger drilling function, after equipped with mud pump or air compressor according to client’s demand, the drilling rig can carry out mud drilling or downhole hammer drilling, it can be used to drill in complex stratum area like rock, clay, rivers network, and so on. 2 Main technology parameter: Drilling depth Air/Mud drilling 30 m/100ft Auger drilling 20 m/65ft Drilling method Mud drilling, auger drilling Drilling hole diameter 90 mm (Mud drilling) 90 mm (Auger drilling) Auger drilling bit 90 mm

develop zone

Karachi

Irina

+86-312-3631122

0086-15930483969

threesource@yahoo.com.cn

+86-312-3632588

http://http:www.threesource.cn