PAKISTAN

PPH Butterfly Valve

JONLOO company supplies PPH Butterfly Valve , which is strongly anti-corrosive and is the good choice for the application of chemical industry.

Zhangbao Industrial Zone, Yongjia Oubei, Wenzhou City, Zhejiang Province, China.

A City in China

Jeasin

0086-18221749603

jonloovalves@jeawin.com

http://www.jonloovalves.com/

RW series actuator

The RW Series fork type double acting pneumatic actuator adopts the piston double guide design. With stable and reliable piston movement, it has such features as high output torque, convenient installation and maintenance, etc. Through the piston seal ring sealing, the air supply pressure acts on the piston to produce movement and drives the push rod to move leftwards or right wards. Through the switching of the fork, the linear motion is turned to the rotary motion with amaximum angle of 100°. The RW Series actuator is an ideal actuator for rotary valves with its compact structure and beautiful appearance. The RWS Series fork type single acting pneumatic actuator adopts the piston double guide design. With stable and reliable piston movement, it is provided with the spring at one end of the piston. It has such features as high output torque, convenient installation and maintenance, etc. Through the piston seal ring sealing, the air supply pressure acts on the piston to produce movement and drives the push rod to move leftwards or rightwards. Through the switching of the fork, the linear motion is turned to the rotary motion with a maximum angle of 100°. In case the air supply is off, spring reset is carried out to make the valve open or close. RW series actuator output torque Note: The above single acting and double acting output forces are the output forces when the output shaft is 45°.The output forces when the output shaft is 0° and 90° are 1.414 times the output force when the output shaft is 45° Double acting output torque features (Unit): N.m Model Air pressure 0.3 0.4 0.5 0.6 0.7 RW A16 723 964 1205 1446 1687 RW A20 1130 1507 1884 2260 2637 RW A25 2649 3532 4415 5298 6181 RW A28 3323 4430 5538 6646 7753 RW A28 4615 6154 7693 9231 10770 RW A35 7212 9616 12020 14424 16828 RW A40 9420 12560 15700 18840 21980 RW A45 11922 15896 19870 23844 27818 Torque table of single acting actuator (Unit):N.m Model Spring torque Air pressure 0.4 0.5 0.6 Min. Max. Min. Max. Min. Max. Min. Max. RW A16S 106 1618 736 1148 1325 1734 1913 2325 RW A20S 1513 2031 922 1440 1661 2179 2399 2917 RW A25S 22070 3043 1387 2160 2492 3267 3603 4376 RW A28S 3547 4759 2164 3374 3895 5107 5625 6837 RW A28S 4928 6610 3006 4688 5409 7092 7814 9496 RW A35S 8146 10928 4968 7750 8941 11723 12916 15698 RW A40S 9812 13246 5594 9028 10304 13738 15014 18448 RW Series outline dimensions and connection dimensions RW series outline dimensions and connection dimensions

609ROOM,2#Yinghua International Plaza, Guangfu Road,Putuo District ,Shanghai China

A City in China

zoe

86-21-52805955

reowozoe@outlook.com

86-21-62808550

http://www.reowo.com

Sleeved Plug Valve 4 inch 150LB PTFE Sleeve API599

China Plug Valve Manufacturer JONLOO supplies sleeved plug valve, and the material of sleeve is PTFE. Standards Design and Manufacture: API 599, API 6D,ASME B16.34 Face to Face: ASME B16.10,EN 558-1 Flanged Ends: ASME B16.5,EN1092-1 Test and Inspection: API 598, API 6D,DIN3230 Pressure-Temperature Ratings:ASME B16.34

Zhangbao Industrial Zone, Yongjia Oubei, Wenzhou City, Zhejiang Province, China.

A City in China

Jeasin

0086-18221749603

jonloovalves@jeawin.com

http://www.jonloovalves.com/

Tank bottom angle valve with pipe connecting (opening into tank type )

The tank bottom angle valve(referred to as Tank valve, Angle bottom valve, Bottom drain valve, Flush mount valve etc) are designed to provide drainage and dead space free shutoff for reactors, vessels, autoclaves and storage tanks. The dead space free shutoff is accomplished by placing the valve seat flush with the bottom of the vessel. This eliminates any buildup of product within the vessel nozzle itself. Features 1.This tank bottom angle valve is manufactured in integrated Y type structure; 2.Both Rising Disc Type (the valve is opened into tank) and lowering disc type ((the valve is opened into valve) can be designed by Quanshun valve; 3.Crust breaking for disc rising type, so anti_scaling function is avaliable. 4.The sealing surface of the valve seat and the valve disc is made of over laying cemented carbide or painted with tungsten carbide. The auxiliary line sealing guarantee the reliability of the sealing performance. 5.Air cylinder operation is usual for saving labor.

NO.28 Huagong Road,High and New Technology Zone

A City in China

emily liu

+86-18236986592

emily@qslkvalves.com

http://www.qslkvalves.com

The 30D03Y/30D03R self-operated differential pressure control

Summary The30D03Y/30D03Rself-operated differential pressure control valve is composed of the control valve ，actuator and a spring used for pressure setting。It is suitable for controling differential pressure in the pipes of non-corrosive liquids, gases and steams. when the valve is closed The main features are as follows: 1.It has the pressure balancing function with high sensitivity. 2.Low noise, reliable performance, free of maintenance 3.The standard modular design is adopted. 4.Various combined controls can be carried out through the assemblies. Body DN 15、20、25、32、40、50、65、80、100、125、150、200、250mm PN Class150、300 Flange standard ANSI、JIS、DIN GB JB(special standards can be offered according to user requirements) Body material WCB、CF8、CF3、CF8M、CF3M Plug material Hard seal Stainless steel (304、316、316L) Soft seal Stainless steel embedded with rubber ring Pressure balancing Stainless steel bellows (DN15~125), balanced diaphragm (DN150~250) Actuator Effective area (cm2) 80 250 630 Pressure setting range 0.1~0.6 0.05~0.3 0.015~0.15 0.01~0.07 0.005~0.035 Minimum differential pressure that ensures normal work of the pressure valve ≥0.04 ≥0.01 ≥0.005 Allowable maximum differential pressure between the upper a nd lower diaphragm chambers 1.25 0.4 0.15 Material Diaphragm cover: galvanized steel sheet; Diaphragm: EPDM or FKM with fiber Control pipeline connection Copper pipe or steel pipe Φ10X 1(mm); Ferrule connection: R1/4" Note: ※The pressure setting range corresponding to the effective area does not apply to valves with DN150-250. Performance Set value error ±8% Allowable leakage (under stipulated testing conditions) Hard seal 4×0.01% valve rated capacity Soft seal DN15~50 DN65-DN125 DN150~250 10 bubbles/ min 20 bubbles/min 40 bubbles/min Structural figure 1Body 2Seat 3 Valve shaft 4 Bonnet 5 Diaphragm cover 6 Diaphragm 7 Spring 8 Adjusting nut 9 Bellows 10Balanced diaphragm 11Charging valve Allowable working temperature DN 15~125mm 150~250mm seal type Hard seal ≤150℃ ≤140℃ Cooling tank≤200℃ Cooling tank and extension ≤200℃ Cooling tan k and heat sink ≤350℃※ Cooling tank and extension ≤300℃※ Soft seal ≤150℃ Note: ※It indicates the allowable working temperature is valid only when the medium is steam and the body with PN40 shall be adopted w hen the temperature resistance is 350℃. Rated flow coefficient, noise measuring coefficient, allowable differential pressure DN 15 20 25 32 40 50 65 80 100 125 150 200 250 Rated flow coefficient 4 6.3 8 16 20 32 50 80 125 160 280 320 450 Noise measuring coefficient Z value 0.6 0.6 0.6 0.55 0.55 0.5 0.5 0.45 0.4 0.35 0.3 0.2 0.2 Allowable differential PN16 1.6 1.5 1.2 1 pressure (Mpa) PN40 2 Working principle After throttling by the plug and seat, the before-valve pressure P1 of the process medium is changed into the after-valve pressure P2. Through the control pipeline, P1 is input to the upper diaphragm chamber of the actuator and acts on the top disc. The acting force produced balances the reacting force of the spring, determining relative positions of the plug and seat and controlling the before-valve pressure. W hen the before-valve pressure P1 increases, the acting force of P1 that acts on the top disc will increase accordingly. At the time, the acting force on the top disc is higher than the reacting force of the spring to make the plug move away from the seat, until the acting force on the top disc balances the reacting force of the spring. At the time, the flow area between the plug and seat is increased, the flow resistance becomes lower and P1 is reduced to the set value. Likewise, when the before-valve pressure P1 decreases, the acting direction is reverse to the above. This is the working principle during the control of before-valve pressure. When it is necessary to change the set value of before-valve pressure P1, please adjust the adjusting nut. I. Dimensions and weight of control valve DN (mm) 15 20 25 32 40 50 65 80 100 125 150 200 250 L (mm) 130 150 160 180 200 230 290 310 350 400 480 600 730 B (mm) 212 212 238 238 240 240 275 275 380 380 326 354 404 Weight (Kg) 6.2 6.7 9.7 13 14 17 29 33 60 70 80 140 220 B1(mm) — — — — — — — — — — 630 855 1205 Weigh(Kg) — — — — — — — — — — 140 210 300 II. Dimensions and weight of actuator Effective area (cm ) 32 80 250 630 R (mm) 172 172 263 380 H (mm) 435 430 470 520 Weight(Kg) 7.5 7.5 13 28

609ROOM,2#Yinghua International Plaza, Guangfu Road,Putuo District ,Shanghai China

A City in China

zoe

86-21-52805955

reowozoe@outlook.com

86-21-62808550

http://www.reowo.com

BANNER

The 30D04Y 30D04R self-operated differential pressure control valve

Summary The30D04Y/30D04R self-operated differential pressure control valve is composed of the control valve ，actuator and a spring used for pressure setting。 It is suitable for controling differential pressure in the pipes of non-crrosive liquids gases and steams. when the diferential pressure rises, the control valve is opened The main features are as follows: 1.It has the pressure balancing Function with high sensitivity. 2.Low noise, reliable performance free of maintenance 3.The standard modular design is adopted. 4.Various combined controls can be carried out through the assemblies Body DN 15、20、25、32、40、50、65、80、100、125、150、200、250mm PN Class150、300 Flange standard ANSI、JIS、DIN GB JB(special standards can be offered according to user requirements) Body material WCB、CF8、CF3、CF8M、CF3M Plug material Hard seal Stainless steel (304、316、316L) Soft seal Stainless steel embedded with rubber ring Pressure balancing Stainless steel bellows (DN15~125), balanced diaphragm (DN150~250) Actuator Effective area (cm2) 80 250 630 Pressure setting range 0.1~0.6 0.05~0.3 0.015~0.15 0.01~0.07 0.005~0.035 Minimum differential pressure that ensures normal work of the pressure valve ≥0.04 ≥0.01 ≥0.005 Allowable maximum differential pressure between the upper a nd lower diaphragm chambers 1.25 0.4 0.15 Material Diaphragm cover: galvanized steel sheet; Diaphragm: EPDM or FKM with fiber Control pipeline connection Copper pipe or steel pipe Φ10X 1(mm); Ferrule connection: R1/4" Performance Set value error ±8% Allowable leakage (under stipulated testing conditions) Hard seal 4×0.01% valve rated capacity Soft seal DN15~50 DN65-DN125 DN150~250 10 bubbles/ min 20 bubbles/min 40 bubbles/min Structural figure 1Body 2Seat 3 Valve shaft 4 Bonnet 5 Diaphragm cover 6 Diaphragm 7 Spring 8 Adjusting nut 9 Bellows 10Balanced diaphragm 11Charging valve Allowable working temperature DN 15~125mm 150~250mm seal type Hard seal ≤150℃ ≤140℃ Cooling tank≤200℃ Cooling tank and extension ≤200℃ Cooling tan k and heat sink ≤350℃※ Cooling tank and extension ≤300℃※ Soft seal ≤150℃ Note: ※It indicates the allowable working temperature is valid only when the medium is steam and the body with PN40 shall be adopted w hen the temperature resistance is 350℃. Rated flow coefficient, noise measuring coefficient, allowable differential pressure DN 15 20 25 32 40 50 65 80 100 125 150 200 250 Rated flow coefficient 4 6.3 8 16 20 32 50 80 125 160 280 320 450 Noise measuring coefficient Z value 0.6 0.6 0.6 0.55 0.55 0.5 0.5 0.45 0.4 0.35 0.3 0.2 0.2 Allowable differential PN16 1.6 1.5 1.2 1 pressure (Mpa) PN40 2 Working principle After throttling by the plug and seat, the before-valve pressure P1 of the process medium is changed into the after-valve pressure P2. Through the control pipeline, P1 is input to the upper diaphragm chamber of the actuator and acts on the top disc. The acting force produced balances the reacting force of the spring, determining relative positions of the plug and seat and controlling the before-valve pressure. W hen the before-valve pressure P1 increases, the acting force of P1 that acts on the top disc will increase accordingly. At the time, the acting force on the top disc is higher than the reacting force of the spring to make the plug move away from the seat, until the acting force on the top disc balances the reacting force of the spring. At the time, the flow area between the plug and seat is increased, the flow resistance becomes lower and P1 is reduced to the set value. Likewise, when the before-valve pressure P1 decreases, the acting direction is reverse to the above. This is the working principle during the control of before-valve pressure. When it is necessary to change the set value of before-valve pressure P1, please adjust the adjusting nut. I. Dimensions and weight of control valve DN (mm) 15 20 25 32 40 50 65 80 100 125 150 200 250 L (mm) 130 150 160 180 200 230 290 310 350 400 480 600 730 B (mm) 212 212 238 238 240 240 275 275 380 380 326 354 404 Weight (Kg) 6.2 6.7 9.7 13 14 17 29 33 60 70 80 140 220 B1(mm) — — — — — — — — — — 630 855 1205 Weigh(Kg) — — — — — — — — — — 140 210 300 II. Dimensions and weight of actuator Effective area (cm ) 32 80 250 630 R (mm) 172 172 263 380 H (mm) 435 430 470 520 Weight(Kg) 7.5 7.5 13 28

609ROOM,2#Yinghua International Plaza, Guangfu Road,Putuo District ,Shanghai China

A City in China

zoe

86-21-52805955

reowozoe@outlook.com

86-21-62808550

http://www.reowo.com

The 30D12Y 30D12R pilot-operated (after valve) pressure control valve

Summary The30D12Y/30D12R pilot-operated (after valve) pressure control valve is composed of the control valve ，pilot and actuator .It is suitable for controling differential pressure in the pipes of non-crrosive liquids, gases and steams. when the diferential pressure rises, the control valve is closed . The main features are as follows: 1. It has the pressure balancing function 2. Low noise, reliable performance, free of maintenance 3. The standard modular design is adopted. 4. High control precision Body DN 15、20、25、32、40、50、65、80、100、125、150、200、250mm PN Class150、300 Flange standard ANSI、JIS、DIN GB JB(special standards can be offered according to user requirements) Body material WCB、CF8、CF3、CF8M、CF3M Plug material Hard seal Stainless steel (304、316、316L) Soft seal Stainless steel embedded with rubber ring Pressure balancing Stainless steel bellows (DN15~125), balanced diaphragm (DN150~250) Actuator Effective area (cm2) 250 Pressure setting range 0.01~0.12 0.08~0.25 0.2~0.5 0.45~1 0.6~2.0 Minimum differential pressure that ensures normal work of the pressure valve DN15~125 0.08 DN150~250 0.1 Allowable maximum differential pressure between the upper and lower diaphragm chambers 0.4 Material galvanized steel sheet; diaphragm: EPDM or FKM with fiber Control pipeline connection Copper pipe o r steel pipe Φ10X 1(mm); ferrule connect ion: R1/4" Note: ※The pressure setting range corresponding to the effective area does not apply to valves with DN150-250. Performance Set value error ±4% Allowable leakage (under stipulated testing conditions) Hard seal 4×0.01% valve rated capacity Soft seal DN15~50 DN65-DN125 DN150~250 10 bubbles/ min 20 bubbles/min 40 bubbles/min Structural figure 1Body 2Seat 3Stem 4 Before-valve pressure P1 pipe 5 Balanced bellows 6 Travel indicator 7 Diaphragm 8 Spring 9 Operating pressure Ps pipe 10 After-valve pressure P2 pip 11 Pilot 12 Pilot plug 13Spring 14 Bellows 15 Adjusting screw 16 Adjustable needle valve Allowable working temperature DN 15~125mm 150~250mm seal type Hard seal ≤150℃ ≤140℃ Cooling tank≤200℃ Cooling tank and extension ≤200℃ Cooling tan k and heat sink ≤350℃※ Cooling tank and extension ≤300℃※ Soft seal ≤150℃ Note: ※It indicates the allowable working temperature is valid only when the medium is steam Rated flow coefficient, noise measuring coefficient, allowable differential pressure DN 15 20 25 32 40 50 65 80 100 125 150 200 250 Rated flow coefficient 4 6.3 8 16 20 32 50 80 125 160 280 320 450 Noise measuring coefficient Z value 0.6 0.6 0.6 0.55 0.55 0.5 0.5 0.45 0.4 0.35 0.3 0.2 0.2 Allowable differential PN16 1.6 1.5 1.2 1 pressure (Mpa) PN40 2 Working principle After throttling by the plug and seat, the before-valve pressure P1 of the process medium is changed into the after-valve pressure P2. Through the control pipeline, P1 is input to the upper diaphragm chamber of the actuator and acts on the top disc. The acting force produced balances the reacting force of the spring, determining relative positions of the plug and seat and controlling the before-valve pressure. W hen the before-valve pressure P1 increases, the acting force of P1 that acts on the top disc will increase accordingly. At the time, the acting force on the top disc is higher than the reacting force of the spring to make the plug move away from the seat, until the acting force on the top disc balances the reacting force of the spring. At the time, the flow area between the plug and seat is increased, the flow resistance becomes lower and P1 is reduced to the set value. Likewise, when the before-valve pressure P1 decreases, the acting direction is reverse to the above. This is the working principle during the control of before-valve pressure. When it is necessary to change the set value of before-valve pressure P1, please adjust the adjusting nut. I. Dimensions and weight of control valve DN (mm) 15 20 25 32 40 50 65 80 100 125 150 200 250 L (mm) 130 150 160 180 200 230 290 310 350 400 480 600 730 B (mm) 212 212 238 238 240 240 275 275 380 380 326 354 404 Weight (Kg) 6.2 6.7 9.7 13 14 17 29 33 60 70 80 140 220 B1(mm) — — — — — — — — — — 630 855 1205 Weigh(Kg) — — — — — — — — — — 140 210 300 II. Dimensions and weight of actuator Effective area (cm ) 250 R (mm) 263 H (mm) DN15~125 150 DN150~250 440 Weight(Kg) 18 22

609ROOM,2#Yinghua International Plaza, Guangfu Road,Putuo District ,Shanghai China

A City in China

zoe

86-21-52805955

reowozoe@outlook.com

86-21-62808550

http://www.reowo.com

The 30D13Y 30D13R pilot-operated (before valve) pressure control valve

Summary The 30D13Y/30D13R pilot-operated (before valve) pressure control valve is composed of the control valve ，pilot and actuator. It is suitable for controling differential pressure in the pipes of non-crrosive liquids, gases and steams. when the diferential pressure rises, the control valve is opened The main features are as follows: 1.It has the pressure balancing function with high sensitivity. 2.Low noise, reliable performance, free of maintenance 3.The standard modular design is adopted. 4.High control precision Body DN 15、20、25、32、40、50、65、80、100、125、150、200、250mm PN Class150、300 Flange standard ANSI、JIS、DIN GB JB(special standards can be offered according to user requirements) Body material WCB、CF8、CF3、CF8M、CF3M Plug material Hard seal Stainless steel (304、316、316L) Soft seal Stainless steel embedded with rubber ring Pressure balancing Stainless steel bellows (DN15~125), balanced diaphragm (DN150~250) Actuator Effective area (cm2) 250 Pressure setting range 0.01~0.12 0.08~0.25 0.2~0.5 0.45~1 0.6~2.0 Minimum differential pressure that ensures normal work of the pressure valve DN15~125 is 0.08 DN150~250 is 0.1 Allowable maximum differential pressure between the upper and lower diaphragm chambers 0.4 Material galvanized steel sheet; diaphragm: EPDM or FKM with fiber Control pipeline connection Copper pipe o r steel pipe Φ10X 1(mm); ferrule connect ion: R1/4" Note: ※T he pressure setting range corresponding to the effective area does not apply to valves with DN150-250. Performance Set value error ±4% Allowable leakage (under stipulated testing conditions) Hard seal 4×0.01% valve rated capacity Soft seal DN15~50 DN65-DN125 DN150~250 10 bubbles/ min 20 bubbles/min 40 bubbles/min Structural figure 1Body 2Seat 3 Stem 4 Before-valve pressure P1 pipe 5 Balanced bellows 6Travel indicator 7 Diaphragm 8 Spring 9 Operating pressure Ps pipe 10After-valve pressure P2 pip 11 Pilot 12 Pilot plug 13Spring 14 Bellows 15 Adjusting screw 16 Adjustable needle valve Allowable working temperature DN 15~125mm 150~250mm seal type Hard seal ≤150℃ ≤140℃ Cooling tank≤200℃ Cooling tank and extension ≤200℃ Cooling tan k and heat sink ≤350℃※ Cooling tank and extension ≤300℃※ Soft seal ≤150℃ Note: ※It indicates the allowable working temperature is valid only when the medium is steam Rated flow coefficient, noise measuring coefficient, allowable differential pressure DN 15 20 25 32 40 50 65 80 100 125 150 200 250 Rated flow coefficient 4 6.3 8 16 20 32 50 80 125 160 280 320 450 Noise measuring coefficient Z value 0.6 0.6 0.6 0.55 0.55 0.5 0.5 0.45 0.4 0.35 0.3 0.2 0.2 Allowable differential PN16 1.6 1.5 1.2 1 pressure (Mpa) PN40 2 Working principle After throttling by the plug and seat, the before-valve pressure P1 of the process medium is changed into the after-valve pressure P2. Through the control pipeline, P1 is input to the upper diaphragm chamber of the actuator and acts on the top disc. The acting force produced balances the reacting force of the spring, determining relative positions of the plug and seat and controlling the before-valve pressure. W hen the before-valve pressure P1 increases, the acting force of P1 that acts on the top disc will increase accordingly. At the time, the acting force on the top disc is higher than the reacting force of the spring to make the plug move away from the seat, until the acting force on the top disc balances the reacting force of the spring. At the time, the flow area between the plug and seat is increased, the flow resistance becomes lower and P1 is reduced to the set value. Likewise, when the before-valve pressure P1 decreases, the acting direction is reverse to the above. This is the working principle during the control of before-valve pressure. When it is necessary to change the set value of before-valve pressure P1, please adjust the adjusting nut. I. Dimensions and weight of control valve DN (mm) 15 20 25 32 40 50 65 80 100 125 150 200 250 L (mm) 130 150 160 180 200 230 290 310 350 400 480 600 730 B (mm) 212 212 238 238 240 240 275 275 380 380 326 354 404 Weight (Kg) 6.2 6.7 9.7 13 14 17 29 33 60 70 80 140 220 B1(mm) — — — — — — — — — — 630 855 1205 Weigh(Kg) — — — — — — — — — — 140 210 300 II. Dimensions and weight of actuator Effective area (cm ) 250 R (mm) 263 H (mm) DN15~125 150 DN150~250 440 Weight(Kg) 18 22

609ROOM,2#Yinghua International Plaza, Guangfu Road,Putuo District ,Shanghai China

A City in China

zoe

86-21-52805955

reowozoe@outlook.com

86-21-62808550

http://www.reowo.com

The 30T01Y 30T01R self-operated temperature (heating type) control valve

Summary The 30T0 1Y/30T01R self-operated temperature （heating type ）control valve is composed of the control valve and temperature cont roller provided with fixed point control..It is suitable for controling differential pressure in the pipes of non-crrosive liquids, gases and steams. when the temperature of the controlled mediums rises, the control valve is closed The main features are as follows: 1.It has the pressure balancingfuncti on with high sensitivity. 2.Low noise, reliable performance, free of maintenance. 3.The standard modular design is adopted. 4.It adopts the imported fixed point controller, which has the over temperature protection function with reliable quality 5.Various combined controls can be carried out through the assemblies. Body DN 15、20、25、32、40、50、65、80、100、125、150mm PN Class150、300 Flange standard ANSI、JIS、DIN GB JB(special standards can be offered according to user requirements) Body material WCB、CF8、CF3、CF8M、CF3M Plug material Hard seal Stainless steel (304、316、316L) Soft seal Stainless steel embedded with rubber ring Pressure balancing Stainless steel bellows (DN15~125), balanced diaphragm (DN150) Actuator Actuator mode T06 T17 Temperature setting range(℃) -20~50 20~90 40~110 60~120 Special temperature setting(℃) 110~180 180~250 Temperature protection Exceeding the set value 100℃ Time constant(S) 120 20 Temperature sensor material Nickel-coated copper Capillary tube length 5、10、15m Performance Set value error ±1.5℃ Allowable leakage (under stipulated testing conditions) Hard seal 4×0.01% valve rated capacity Soft seal DN15~50 DN65-DN125 DN150 10 bubbles/ min 20 bubbles/min 40 bubbles/min Allowable working temperature DN 15~150mm Seal type Hard seal ≤150℃ Cooling tank≤200℃ Cooling tank and he at s ink≤350 ℃※ Soft seal ≤150℃ Rated flow coefficient, noise measuring coefficient, allowable differential pressure DN 15 20 25 32 40 50 65 80 100 125 150 Rated flow coefficient 4 6.3 8 16 20 32 50 80 125 160 280 Noise measuring coefficient Z value 0.6 0.6 0.6 0.55 0.55 0.5 0.5 0.45 0.4 0.35 0.3 Allowable differential PN16 1.6 1.5 1.2 pressure (Mpa) PN40 2 Working principle When the temperature of the controlled object is lower than the set temperature, the liquid in the temperature sensor will contract, the force acted on the push rod of the actuator decreases, and the plug makes the valve open under the action of the spring force. The flow of steam, hot oil and other heating media is enhanced, so that the temperature of the controlled object rises. The valve will be closed when the temperature of the controlled object rises to the set value. After the valve is closed, the temperature of the controlled object falls and the valve is opened again. The heating media enter the heat exchanger and the temperature rises again, so as to make the temperature of the controlled object be a constant. The opening of the valve is related to the difference between the actual temperature of the controlled object and the set temperature. I. Dimensions and weight of control valve DN (mm) 15 20 25 32 40 50 65 80 100 125 150 L (mm) 130 150 160 180 200 230 290 310 350 400 480 B (mm) 212 212 238 238 240 240 275 275 380 380 326 Weight (Kg) 6.2 6.7 9.7 13 14 17 29 33 60 70 80 II. Dimensions and weight of actuator Model I(mm) d(mm) R(mm) m Weight(kg) T06 380 24 1” 280 3 .0 T17 500 30 1” 280 3 .5 Difference between actuator T06 and T17 The T06 model temperature sensor is isolated from the controlled medium through the temperature sensor sleeve, i.e., it does not contact the medium and it is easy to maintain. But the response is slow. It is suitable for controlling liquid media. The T17 model temperature sensor directly contacts the controlled medium, and the temperature sensing area is large. Therefore the response is fast. But it is not easy to maintain. It is suitable for controlling gas temperature and liquid temperature.

609ROOM,2#Yinghua International Plaza, Guangfu Road,Putuo District ,Shanghai China

A City in China

zoe

86-21-52805955

reowozoe@outlook.com

86-21-62808550

http://www.reowo.com

The 30T02Y /R self-operated temperature (cooling type) control valve

Summary The 30T02Y/30T02R self-operated temperature （cooling type ）control valve is composed of the control valve and a temperature controller provided with fixed point control. It is suitable for controling differential pressure in the pipes of non-crrosive liquids, gases and steams. when the temperature of the controlled mediums rises, the control valve is opened The main features are as follows: 1.It has the pressure balancing function with high sensitivity. 2.Low noise, reliable performance, free of maintenance 3.The standard modular design is adopted. 4.It adopts the imported fixed point controller, which has the over temperature protection function with reliable quality. 5.Various combined controls can be carried out through the assemblies. Body DN 15、20、25、32、40、50、65、80、100、125、150mm PN Class150、300 Flange standard ANSI、JIS、DIN GB JB(special standards can be offered according to user requirements) Body material WCB、CF8、CF3、CF8M、CF3M Plug material Hard seal Stainless steel (304、316、316L) Soft seal Stainless steel embedded with rubber ring Pressure balancing Stainless steel bellows (DN15~125), balanced diaphragm (DN150~250) Actuator Actuator mode T06 T17 Temperature setting range(℃) -20~50 20~90 40~110 60~120 Special temperature setting(℃) 110~180 180~250 Temperature protection Exceeding the set value 100℃ Time constant(S) 120 20 Temperature sensor material Nickel-coated copper Capillary tube length 5、10、15m Performance Set value error ±1.5℃ Allowable leakage (under stipulated testing conditions) Hard seal 4×0.01% valve rated capacity Soft seal DN15~50 DN65-DN125 DN150 10 bubbles/ min 20 bubbles/min 40 bubbles/min Allowable working temperature DN 15~150mm Seal type Hard seal ≤200℃ Soft seal ≤150℃ Rated flow coefficient, noise measuring coefficient, allowable differential pressure DN 15 20 25 32 40 50 65 80 100 125 150 Rated flow coefficient 4 6.3 8 16 20 32 50 80 125 160 280 Noise measuring coefficient Z value 0.6 0.6 0.6 0.55 0.55 0.5 0.5 0.45 0.4 0.35 0.3 Allowable differential PN16 1.6 1.5 1.2 pressure (Mpa) PN40 2 Working principle when the temperature of the controlled object is higher than the set temperature ，the liquid in the temperature controller will swell ，the force on the push of the actuator increases ，and the pulg makes the valve open under the action of the temperature controller ，the flow of water ， or other cooling media is enhanced ，so that the temperature of the controlled object decreases ，the valve will be closed when the temperature of the controlled object decrease to the set value。after the valve is closed ，the temperature of the controlled object decreases and the valve is opened again 。the cooling media enter the heat exchanger and the temperature decreased again ，so as to make the temperature of the controlled object be a constant。the opening of the valve is related to the difference between the actual temperature of the controlled object and the set temperature。 I. Dimensions and weight of control valve DN (mm) 15 20 25 32 40 50 65 80 100 125 150 L (mm) 130 150 160 180 200 230 290 310 350 400 480 B (mm) 212 212 238 238 240 240 275 275 380 380 326 Weight (Kg) 6.2 6.7 9.7 13 14 17 29 33 60 70 80 II. Dimensions and weight of actuator Model I(mm) d(mm) R(mm) m Weight(kg) T06 380 24 1” 280 3 .0 T17 500 30 1” 280 3 .5 Difference between actuator T06 and T17 The T06 model temperature sensor is isolated from the controlled medium through the temperature sensor sleeve, i.e., it does not contact the medium and it is easy to maintain. But the response is slow. It is suitable for controlling liquid media. The T17 model temperature sensor directly contacts the controlled medium, and the temperature sensing area is large. Therefore the response is fast. But it is not easy to maintain. It is suitable for controlling gas temperature and liquid temperature.

609ROOM,2#Yinghua International Plaza, Guangfu Road,Putuo District ,Shanghai China

A City in China

zoe

86-21-52805955

reowozoe@outlook.com

86-21-62808550

http://www.reowo.com

GOOGLEADD

The 30W01 self-operated micro-pressure control valve

Summary The 30W01 self-operated micro- pressure control valve It is widely used for controlling after-valve pressure (mmH2O) of non corrosive gas or air with pressure no higher than1.4MPa, working temperature no higher than 120℃(or 150℃) and pressure control range of 0.14 - 7.2KPa. It is widely applied in gas sealing pressure control devices of various oil products, chemicals and liquid storage tanks. Body DN15~100mm PN1.6、4.0 Mpa Material ：WCB、CF8、CF8M Bonnet Material ：WCB、CF8、CF8M Pressure balancing part: diaphragm + spring Material: spring 304 Diaphragm NBR ： -40 - 120℃ Fluorine rubber ： -20 - 150℃ EPR ： -50 - 150℃ ZA7 Actuator (pilot) Diaphragm box Punch forming with A3 steel sheet Diaphragm NBR, fluorine rubber, EPR Spring：304 Plug：304 Sea：304 Stem：304 *The actuator with five kinds of pressure control ranges and one model *Easy assembly and disassembly, convenient control The 30W01 micro-pressure control valve DN 15 20 25 32 40 50 65 80 100 Rated flow coefficient Kv 4 6 .3 8 16 20 32 50 80 25 Flow characteristic Quick open PN 1 .6 Mpa Pressure balancing part SPRING 1Cr 18 Ni9 Bellows diaphragm NBR Fluorine rubber EPR Working temperature -40 ~120℃ -20 ~150℃ -50~ 150℃ Allowable leakage (input 0.1MPapressure before the valve) 1 bubble/min 2 bubbles/min 3 bubbles/min 4 bubbles/min 6 bubbles/ min 11 bubbles/min Main technical parameters of ZA7 actuator (pilot) Effective area(cm2) 430 After-valve pressure 0 .14~0 .36 0 .3 2~ 1.00 0 .90~2 .50 control range (Kpa) 2 .10~4 .50 3 .9 0~7 .20 　 Maximum output force Mpa ≤1.4 Minimum output force Mpa ≥0 .2 Diaphragm material NBR Fluorine rubber EPR Working temperature ℃ -4 0~ 120℃ -20~150℃ -50~ 150℃ Adjusting precision ±15% Control pipeline, connection Copper pipe or steel pipe Φ10X 1(mm); ferrule connection: R1/4" Product features: * Simple structure, convenient installation and commissioning, low maintenance cost * Wide adjusting range: Adjustment of five levels can be carried out within the range of 14~720mmH2O. * Fast response and high adjusting precision * Playing the safety protection function when being used in the storage tank nitrogen sealing system. Ⅰ.Normal temperature type A$R\DN 15 20 25 32 40 50 65 80 100 ZA7 Hmm 320 370 390 400 410 438 460 500 520 φ280mm Kg 18 21 26 32 40 47 60 65 71 L 160 160 160 230 230 230 290 310 350

609ROOM,2#Yinghua International Plaza, Guangfu Road,Putuo District ,Shanghai China

A City in China

zoe

86-21-52805955

reowozoe@outlook.com

86-21-62808550

http://www.reowo.com

Top entry type double eccentric semi-ball vavle

n the base of eccentric semi-ball valve, Top entry segment ball valve was developed .They are widely used in the water system which including tiny solid particle medium,such as the South-North Water Diversion Project . Benefits 1 Full bore design , small pressure loss ; 2.Lower opening torque ,which is less than half of the same size ball valve ; 3.Easy to maintain:It is not required removing from the pipe when valve repair, as long as you open the valve cover . 4. Large size can be designed ,max up to DN2000. 5.With anti- scaling function Technical specifications Size :DN100~DN1400 Pressure ：PN1.0~PN1.6MPa Body material：WCB Sealing material:Hard alloy or special treatment by spraying . Connect method :Flange,weld Driving method:worm gear ,pneumatic ,electric etc Application Water industry Municipal Engineering

NO.28 Huagong Road,High and New Technology Zone

A City in China

emily liu

+86-18236986592

emily@qslkvalves.com

http://www.qslkvalves.com

UMS traders & supplier

We manufacture industrial cost iron high preasure valves in PN 2 to PN 16 we manufacture in gate valves , glob valves , non return valves ., stanire valves , and also manufacture in pipe feeting and deal with flanges and SS valves ball valves

brandeth road st# 7 al kareem market lahore

Lahore

03234845116

03234845116

03234845116

bilalakram134@gmail.com

Wafer Knife Gate Valve DN150MM PN10 GG25 GGG40 Rubber Seat

China Knife Gate Valve Manufacturer Jonloo supplies Wafer Knife Gate Valve -- DN150MM, PN10, GG25 or GGG40 material, with rubber seat. 4.Product charateristics: The valve is featured with compact design,being space-effective,low price,easy installation, complete protection from abrasion and seizure,user-friendly maintenance and operation,long service life and free actuator options.

Zhangbao Industrial Zone, Yongjia Oubei, Wenzhou City, Zhejiang Province, China.

A City in China

Jeasin

0086-18221749603

jonloovalves@jeawin.com

http://www.jonloovalves.com/